Small Ecco Stove (E678)
The Ecco Stove releases heat slowly through energy-efficient heating, it creates a consistent warmth for your entire home. And with 85.3% efficiency and just 0.24% carbon production, the Ecco Stove is the ultimate alternative to a traditional wood burning stove. Because the Ecco Stove uses a slow heat release system, your home is heated for longer. Tests have shown that Ecco Stoves still release 25% of their absorbed heat 7 hours after reaching their full temperature. A lower heat release will keep a well-insulated building up to temperature an incredible 14 hours after 20kg of wood has been burned.
The Ecco Stove is the perfect addition to any home. From the traditional to the ultra-modern, this versatile stove will complement your existing decor perfectly while offering cost-effective, energy-efficient heating.
Ecco Stove
Ecco Stove Brochure Ecco Stove- Ticked Boxes
There are countless benefit of having an Ecco Stove for you, your home, your pocket and the environment:
- Unique design- using silicon carbide, which makes the Ecco Stove the best woodburning stove currently available on the market;
- Slow and constant heat release- meaning that the Ecco Stove is still producing 25% heat 7 hours later;
- Efficient woodburner- 85.3% efficient meaning that you get more heat for you money, minimising costs;
- Low carbon dioxide release- only 0.24% C02 is produced, minimising your impact on the environment;
- Heat your whole house- one Ecco Stove is capable of heating your whole house;
- Even heat distribution- the heat will be evenly distributed around the room, meaning that it won't be too hot near the Ecco Stove but it won't be cold away from it.
Ecco Stove- How it works
A. Air is drawn in to the ash pit (primary air) to rapidly heat the mass up to minimum 150°C top centre (ideally 200°C). When catalysing begins within the firebox.
B. Flue gas is then deflected by a baffle system toward band B simultaneously for clean glass operation via double pass flue ways to absorb as much heat from the flue gas before exiting to atmosphere.
C. Gasification takes place via tertiary air introduction for cleanest combustion after which flue gas passes through the appliace before exaust to atmosphere.
Ecco Stove- Heating Properties
The Ecco Stove has a complex network of flue ways and air channels constructed in to the body of the appliance to extract as much heat from the flue gas before the exaust reaches the atmosphere. This keeps pollutants to a bare minimum. As much heat is extracted from the flue gasses as possible to heat as much of the property as possible, rather than just the room the stove is located.
Silicone Carbide is excellent at absorbing heat and releasing it slowly. CE Standards tests carried out on the Ecco Stove confirm that the stove is able to release 25% of its absorbed heat 7 hours after running up to temperature, but typically the fabric of the building is warmed and even a lower heat release will keep a well insulated building up to temperature 14 hours after 20 kg of wood has been burned (in 2 separate batches). The stoves output is tested and verified as 4 to 11Kw.
The body temperature of the stove is typically 200°C. A traditional steel or cast iron stove could be 400-500°C meaning a more intense heat. If you would like to heat as much of the property without over heating the room, then the Ecco Stove is the choice for you.
Ecco Stove- The Technology
Ultra efficient for clean burning and house heating are some of the unique features of the Ecco Stove.The Ecco Stove was designed to reduce the need for fuels to heat our homes, that in turn create pollution and a heavy relliance on fuel suppliers.
Silicone Carbide
As a heat emitter silicone carbide is a combination of two minerals, that have been fused together to produce the hardest material next to diamond. Silicone Carbide features very special properties of heat absorption and slow heat release. The Ecco Stove has an efficiency rating of 85.3% and a 0.24% carbon production.