Dimmable Toshiba GU10 LED 8.5W (=50w+) (YWLED245)
Fitting: GU10
If it's absolute power you are looking for then this wide beam GU10 LED could be the answer. Engineered to perform and last, it has to properly manage generated heat for long term reliability.
These LEDs are built around Nichia LED's - one of Japan most respected manufacturers so you get class leading performance. The Toshiba GU10 LED 8.5w lamp can be dimmed with most standard dimming switches and is supplied with a 3 YEAR WARRANTY. The overall size of this lamp is 80mm * 50mm.
So just how powerful is this lamp - when the light levels produced by a 50w Halogen Lamp and the Toshiba GU10 LED were compared using a light meter, it was found that the Halogen lamp produced 440 lux at 1.8m whilst the Toshiba GU10 LED produced 390 lux - this is not a significant difference meaning to the human eye if you changed a 50w halogen for this lamp you would not notice any real difference - except in the bills you receive!
This LED light is a warm white and is available in either a wide 35 degree beam for everyday use, or a 25 degree spot when you need to highlight something.
Dimmable Toshiba GU10 LED 8.5W (YWLED245)
Dimmable Toshiba GU10 LED 8.5W (YWLED245) Technical Data
Dimmable Toshiba GU10 LED 8.5w Technical Information
| Dimmable | Yes |
| Power Consumption | 8.5 w |
| Lamp Life | 30000 hours |
| Beam Angle | 30° |
| Lumens | 300lm |
| Voltage | 240v |
LED BROCHURELED Lighting- Ticked boxes
Benefits of LED Lights
-
Reduced energy cost - Consumes up to 92% less energy than Halogen & Incandescent bulbs
-
Longer life span - LED lights last 20-50 times longer than Halogen and Incandescent bulbs and have a typical operating life between 5,000 and 100,000 hours.
-
Environmentally friendly - LED lights contain NO mercury, UV or pollutants and have low CO2 emissions
-
Save money on maintenance - The robust and versatile construction along with the long life of LED lights will reduce maintenance costs.
-
Low heat output and durable - LED lights produce almost no heat and are heat, cold and shock resistant
-
Instant bright lights - LED lights when switched on produce an instant bright and natural light - meaning no waiting time for lights to warm up.
LED Lighting- What the fittings are and which one you want
All our LED lights (apart from the strip lighting) can be retrofitted. This means the LEDs can replace your current bulbs without any hassle of worrying about fittings.
The fittings (endings) of lights are denoted by their product codes. The same endings are used in LED and non-LED lighting.
If you're unsure which is the right code for you, please see the information below or call us on 020 8539 4707.
MR16 Lamp (12v):
MR16s are a type of light fitting. They provide directional light and are well known for their application as down lights.MR16 globe. They require a separate driver. Below is an example of an MR16 fitting.
GU10 (240v):
GU10 is a type of light fitting. The picture below is an example of an GU10 light fitting:
Bayonet Cap (B.C.):
Bayonets caps are the most common and have a twist and push action. They are usually 22mm. See picture below:
Small Bayonet cap (S.B.C.):
The same as a bayonet cap but only 15mm. See picture below:
Edison Screw/ES27:
Edison Screw or ES27s are a type of light fitting. The picture below is an example of an Edison screw:
Small Edison Screw (S.E.S)/ E14:
14mm- usually used for smaller, more decorative bulbs e.g. chandiliers. See picture below:
