Dimmable LED

LED lamps which can be dimmed with the majority of ordinary dimmer switches, needing no special wiring or transformers. This means you can save energy and money without foregoing the ambiance or performance. Use our LEDs as a straight swap for energy-wasting incandescent or halogen lamps! 

We have all sorts of LEDs fitted in our house so for a chat or a nosy round out house call us on 020 8539 4707. 

Dimmable LED

'Candle' Dimmable LED (YWLED308)

   

A retro-fit (SES, BC, SBC fittings), fully dimmable, bulb that would not look out of place on it's own or in a chandelier. 

'Candles' are sophisticated, elegant.  They have miniature LEDs cleverly arranged on a central, vertical spine up the centre of a twisted glass casing to give an even, all round light.  The result is a lamp which looks good whether it’s on or off, in your home or a 5* Hotel.

When you get to the check out let us know which light fitting you'd like by typing it into the 'comments box' there. 
If you're unsure which ending is for you, check out the info in the tabs below or give us a call on 020 8539 4707.

 

£4.99

Dimmable Toshiba GU10 LED 8.5W (=50w+) (YWLED245)

   

Fitting: GU10

If it's absolute power you are looking for then this wide beam GU10 LED could be the answer. Engineered to perform and last, it has to properly manage generated heat for long term reliability.

These LEDs are built around Nichia LED's - one of Japan most respected manufacturers so you get class leading performance.  The  Toshiba GU10 LED 8.5w lamp can be dimmed with most standard dimming switches and is supplied with a 3 YEAR WARRANTY. The overall size of this lamp is 80mm * 50mm.

So just how powerful is this lamp - when the light levels produced by a 50w Halogen Lamp and the Toshiba GU10 LED were compared using a light meter, it was found that the Halogen lamp produced 440 lux at 1.8m whilst the Toshiba GU10 LED produced 390 lux - this is not a significant difference meaning to the human eye if you changed a 50w halogen for this lamp you would not notice any real difference - except in the bills you receive!


This LED light is a warm white and is available in either a wide 35 degree beam for everyday use, or a 25 degree spot when you need to highlight something.

£24.98

Integrated Dimmable Downlighter LED- 7w (YWLED322)

   

A perfect replacement for the traditional halogen lamp and fitting, this integrated unit has a large heat sink and separate transformer for long term reliability - excellent colour and long term stability.

Dimmable - the PFC (Power Factor Corrected) driver supplied with this unit is fully dimmable and compatible with most domestic dimmers including leading and trailing edge types.

Simple to install - you will need a cut out of 64mm - connect the driver to the mains input, push the assembly into place and switch on.

The overall height is just 76mm so it's got an excellent low profile and yet the light output is both powerful and of high quality with a beam angle similar to a standard halogen lamp.

When you get to the check out let us know whether you want warm white or cool white by typing it into the 'comments box' there. 
If you're unsure which colour is for you, give us a call on 020 8539 4707.  

 

£35.00

'Lux' Downlight 15w (=100w)LED (YWFIT215)

   


The solution for lighting large spaces. 
ImageYou get no shadowing yet you have a powerful light created by 36 high power LEDs mounted behind a diffused lens;
ImageA powerful lamp which will last for years if with a driver of the highest technical and manufactured quality;
ImageContinuous service;
ImageLarge pure aluminium heat sink keeping the body temperature low meaning increased long term reliability.
ImageThe driver supplied with this lamp is a 700mA unit capable of handling voltages in the range 12v to 30v
ImageInbuilt thermal and short circuit protection, double insulated, SELV rated and is of course fully CE certificated;
Image3 year warranty. 
 

£59.99

LED Lighting- What the fittings are and which one you want

All our LED lights (apart from the strip lighting) can be retrofitted.  This means the LEDs can replace your current bulbs without any hassle of worrying about fittings. 
The fittings (endings) of lights are denoted by their product codes.  The same endings are used in LED and non-LED lighting.  

If you're unsure which is the right code for you, please see the information below or call us on 020 8539 4707. 


MR16 Lamp (12v):
MR16s are a type of light fitting. They provide directional light and are well known for their application as down lights.MR16 globe. They require a separate driver.  Below is an example of an MR16 fitting.



GU10 (240v):
GU10 is a type of light fitting. The picture below is an example of an GU10 light fitting:



Bayonet Cap (B.C.):
Bayonets caps are the most common and have a twist and push action.  They are usually 22mm.  See picture below:



Small Bayonet cap (S.B.C.):
The same as a bayonet cap but only 15mm.  See picture below: 



Edison Screw/ES27:
Edison Screw or ES27s are a type of light fitting. The picture below is an example of an Edison screw:



Small Edison Screw (S.E.S)/ E14:
14mm- usually used for smaller, more decorative bulbs e.g. chandiliers.  See picture below: