'Candle' Dimmable LED (YWLED308)
A retro-fit (SES, BC, SBC fittings), fully dimmable, bulb that would not look out of place on it's own or in a chandelier.
'Candles' are sophisticated, elegant. They have miniature LEDs cleverly arranged on a central, vertical spine up the centre of a twisted glass casing to give an even, all round light. The result is a lamp which looks good whether it’s on or off, in your home or a 5* Hotel.
When you get to the check out let us know which light fitting you'd like by typing it into the 'comments box' there.
If you're unsure which ending is for you, check out the info in the tabs below or give us a call on 020 8539 4707.
LED Candles
'Candle' Dimmable LED (YWLED308) Technical Information
'Candle' Dimmable LED (YWLED308): Technical Information
| Dimmable | Yes |
| Wattage | 2.5w |
| Lamp Life | 15000 hours |
| Colour Temperature | 2900k |
| Beam Angle | Not detailed |
| Lumens | 90 lm |
| Voltage | 220- 240 V |
Candle Dimmable LED Brochure
Candle Dimmable Ticked Boxes
It’s compatible and fully dimmable with your existing system without modifications;
The light colour is an excellent warm white;
The power consumption is just 2.5w but offers light approximately equivalent to a 20w candle;
Rated to last for more than 30000 hours they will cut down on maintenance costs as well as energy costs;
Built using a clear glass for maximum light output;
Perfect for use in chandeliers where the long life, low energy consumption and traditional shape work well together.
LED Lighting- What the fittings are and which one you want
All our LED lights (apart from the strip lighting) can be retrofitted. This means the LEDs can replace your current bulbs without any hassle of worrying about fittings.
The fittings (endings) of lights are denoted by their product codes. The same endings are used in LED and non-LED lighting.
If you're unsure which is the right code for you, please see the information below or call us on 020 8539 4707.
MR16 Lamp (12v):
MR16s are a type of light fitting. They provide directional light and are well known for their application as down lights.MR16 globe. They require a separate driver. Below is an example of an MR16 fitting.
GU10 (240v):
GU10 is a type of light fitting. The picture below is an example of an GU10 light fitting:
Bayonet Cap (B.C.):
Bayonets caps are the most common and have a twist and push action. They are usually 22mm. See picture below:
Small Bayonet cap (S.B.C.):
The same as a bayonet cap but only 15mm. See picture below:
Edison Screw/ES27:
Edison Screw or ES27s are a type of light fitting. The picture below is an example of an Edison screw:
Small Edison Screw (S.E.S)/ E14:
14mm- usually used for smaller, more decorative bulbs e.g. chandiliers. See picture below:
